Body material: brassStructure: Direct actionType: Normally cosed Seal Material: NBR,EPDM,VITONPort size: 1/8''Port thread: G,NPT,PTOrifice: 2.2mmTemperature: 0°C to 80 °CMedium: water, gas, ste...
Material: Brass
Pressure: Low Pressure
Temperature of Media: High Temperature
Working Pressure: 0-8bar
Product Name: VG10-02833 3 way brass butterfly handle ball strainer valve Size: 1/2" 3/4" 1" Material: Brass Field of Application: Water Working Pressu...
Material: Brass
Pressure: Low Pressure
Temperature of Media: Normal Temperature
Port Size: 1/2'' 3/4'' 1''
Guanli knife gate valve for industrial service applications.The design of the body and seat assures non-clogging shutoff on suspended solids in industries Such as:*Pulp and Paper*Power plants*Chemical plants*Wastewater*Food and Be...
Material: CF8M/CF8
Knife: SS304/SS316
Standard: EN1092/ANSI/JIS 10K/AS4087
Size range: DN50-DN900
Voltage: 220V/380VFeature: High EfficiencyWarranty: 1 YearTheory: Centrifugal PumpStandard or Nonstandard: StandardPackaging Details: STRONG CARTON PACKING WITH EXPORT STANDARDPort: NI...
Structure: Multistage Pump
Usage: Water
Application: Submersible
Power: Electric
Pump InstalLation And AppLicationsIt can be used to transfer clean water or other liquid similar to water in physical and chemical properties. It is suitable for small living water supply, automatic water sprinkler system, small air...
Shaft: Stainless steel welded shafti45# steel
Insulation class: B or F
Protection class: IPX4
Max. Ambient temperature: +40t
Air Release Valves are used to release the air that are formed in pipelines. Steady air release can avoid pressure surge and protect pipe lines from damaging. The Air Release Valve can release air when pipes are filled with water, a...
Application: Water Industrial Usage, Industrial Usage
Pressure: Pn1.0 ~ 2.5MPa
Temperature of Media: -10~120℃
Structure: Air Release
DK-10 carbon steel self-lubricating bearings, which using high quality low-carbon steel plate asbase, sintered porous bronze as i.ts interlayer and the compound of PTFE as its surface. It offersthe property of good self-lubrication, ...
Max. Load :Static: 250N/mm²
Max.Load:Dynamic: 140N/mm²
Max Speed:Dry: 2m/s
Max Speed:Lubrication: >2m/s
DK-35 use the stainless steel mesh as base and covered by wear resistant material PTFE. It is widelyused in chemical industry and food industry; such as chemical valves whose parts need lubricatingin the sea. This product highly imp...
Max. Load :Static: 80N/mm²
Max.Load:Dynamic: 40N/mm²
Max Speed:Dry: 1m/s
Max Speed:Lubrication: >1m/s
1. Overview1.1 Performance profile of the ALP210 The ALP210 uses a microcontroller electronic control unit, the PID exact algorithm of the pneumatic instrument. With keys, LCD dot arra...
Equivalent resistance:: 425 Ω (625 Ω; HART protocol type)
Control accuracy:: 0.5%
Lineity:: 1%
Sensitivity: adaptive; or artificially set during : 0.1%~5%
1. Overview1.1 Performance profile of the ALP210 The ALP210 uses a microcontroller electronic control unit, the PID exact algorithm of the pneumatic instrument. With keys, LCD dot arra...
Equivalent resistance:: 425 Ω (625 Ω; HART protocol type)
Control accuracy:: 0.5%
Lineity:: 1%
Sensitivity: adaptive; or artificially set during : 0.1%~5%
Our Range:Butterfly Valve,Gate Valve,Check Valve,Globe Valve,Ball Valve,Y Strainer,Rubber Joint DIN F4/F5 Resilient Seated Gate ValveSpecification...
Body&Bonnet: Ductile Iron
Disc: Ductile Iron+EPDM/NBR
Stem: Stainless Steel
Design: DIN3352 F4/F5
Our Range:Butterfly Valve,Gate Valve,Check Valve,Globe Valve,Ball Valve,Y Strainer,Rubber Joint DIN F4/F5 Resilient Seated Gate ValveSpecific...
Body&Bonnet: Ductile Iron
Disc: Ductile Iron+EPDM/NBR
Stem: Stainless Steel
Design: DIN3352 F4/F5
Our Range:Butterfly Valve,Gate Valve,Check Valve,Globe Valve,Ball Valve,Y Strainer,Rubber Joint Specifications Wafer check valve, dual&...
Body: Cast Iron
Disc: CI/DI/Stainless Steel/Al-bronze
Seat: EPDM
Stem: Stainless Steel
Our Range:Butterfly Valve,Gate Valve,Check Valve,Globe Valve,Ball Valve,Y Strainer,Rubber Joint Specifications Wafer check valve...
Body: CI/DI
Disc: CI/DI/Stainless Steel/Al-bronze
Seat: EPDM
Stem: Stainless Steel
Our Range:Butterfly Valve,Gate Valve,Check Valve,Globe Valve,Ball Valve,Y Strainer,Rubber Joint Specifications Wafer check valve, dual&...
Body: CI/DI
Disc: CI/DI/Stainless Steel/Al-bronze
Seat: EPDM
Stem: Stainless Steel
Our Range:Butterfly Valve,Gate Valve,Check Valve,Globe Valve,Ball Valve,Y Strainer,Rubber Joint Specifications 1. Working temperature: -45&nb...
Body: CI/DI
Disc: DI+Ni/AL-B/CF8/CF8M
Seat: EPDM/NBR/PTFE/Viton
Stem/Shaft: CS/SS
Our Range:Butterfly Valve,Gate Valve,Check Valve,Globe Valve,Ball Valve,Y Strainer,Rubber Joint Specifications 1. Working temperature: -...
Body: CI/DI
Disc: DI+Ni/AL-B/CF8/CF8M
Seat: EPDM/NBR/PTFE/Viton
Stem/Shaft: CS/SS
Our Range:Butterfly Valve,Gate Valve,Check Valve,Globe Valve,Ball Valve,Y Strainer,Rubber Joint Specifications 1. Working temperature: -...
Body: CI/DI
Disc: DI+Ni/AL-B/CF8/CF8M
Seat: EPDM/NBR/PTFE/Viton
Stem/Shaft: CS/SS
Our Range:Butterfly Valve,Gate Valve,Check Valve,Globe Valve,Ball Valve,Y Strainer,Rubber Joint Specifications 1. Working temperature: -...
Body: CI/DI
Disc: DI+Ni/AL-B/CF8/CF8M
Seat: EPDM/NBR/PTFE/Viton
Stem/Shaft: CS/SS
Our Range:Butterfly Valve,Gate Valve,Check Valve,Globe Valve,Ball Valve,Y Strainer,Rubber Joint Specifications 1. Working temperature: -45&nb...
Body: CI/DI
Disc: DI+Ni/AL-B/CF8/CF8M
Seat: EPDM/NBR/PTFE/Viton
Stem/Shaft: CS/SS
502-F (ANSI) Cast Iron NRS Gate Valve threaded ends1. Design and Manufacture Conform to MSS SP-702. Face to Face dimensions Conform to ANSI B16.10 (1251b)3. Testing Conform to MSS SP-704. It can be equipp...
ca: CI
NRS:
metal seal: brass/ss
518-F (ANSI) Cast Iron /ductile iron waste cone1. Flange dimensions Conform to ANSI B16.1 (1251b)2.The mesh of wire screen or the hole dimension of the perforated screen can be as per the customer′s requirement.
cast iron: DI
waste cone: pipe
504-F (ANSI) Cast Iron Globe Valve1. Design and Manufacture Conform to MSS SP-852. Flange dimensions Conform to ANSI B16.1 (1251b)3. Face to Face dimensions Conform to ANSI B16.10 (1251b)4. Testing Conform ...
cast iron: di/ci
valve: angle
859-F (DIN) Cast Iron single air valve1. Flange dimensions Conform to DIN 25332. Face to Face dimensions Conform to DIN 3202 3. Testing Conform to DIN 32304. It can be operated with bevel gear according to customer’...
CI/DI:
single outlet:
SS304 ball:
stem SS410:
1203-F (DIN) wafer butterfly valve1. Flange dimensions Conform to DIN 25332. Face to Face dimensions Conform to DIN 3202 F63. Testing Conform to DIN 3230
CI/DI:
wafer type:
EPDM seat:
stem SS416:
608-F (BS) Cast Iron Float Valve1. Design and Manufacture Conform to BS51632. Flange dimensions Conform to BS4504 PN16& EN10923. Face to Face dimensions Conform to BS5163 PN164. Testing Conform to BS675...
CI/DI:
SS304 ball:
o-rings:
stem SS410: