Body material: brassStructure: Direct actionType: Normally cosed Seal Material: NBR,EPDM,VITONPort size: 1/8''Port thread: G,NPT,PTOrifice: 2.2mmTemperature: 0°C to 80 °CMedium: water, gas, ste...
Material: Brass
Pressure: Low Pressure
Temperature of Media: High Temperature
Working Pressure: 0-8bar
Product Name: VG10-02833 3 way brass butterfly handle ball strainer valve Size: 1/2" 3/4" 1" Material: Brass Field of Application: Water Working Pressu...
Material: Brass
Pressure: Low Pressure
Temperature of Media: Normal Temperature
Port Size: 1/2'' 3/4'' 1''
Guanli knife gate valve for industrial service applications.The design of the body and seat assures non-clogging shutoff on suspended solids in industries Such as:*Pulp and Paper*Power plants*Chemical plants*Wastewater*Food and Be...
Material: CF8M/CF8
Knife: SS304/SS316
Standard: EN1092/ANSI/JIS 10K/AS4087
Size range: DN50-DN900
Voltage: 220V/380VFeature: High EfficiencyWarranty: 1 YearTheory: Centrifugal PumpStandard or Nonstandard: StandardPackaging Details: STRONG CARTON PACKING WITH EXPORT STANDARDPort: NI...
Structure: Multistage Pump
Usage: Water
Application: Submersible
Power: Electric
Pump InstalLation And AppLicationsIt can be used to transfer clean water or other liquid similar to water in physical and chemical properties. It is suitable for small living water supply, automatic water sprinkler system, small air...
Shaft: Stainless steel welded shafti45# steel
Insulation class: B or F
Protection class: IPX4
Max. Ambient temperature: +40t
Air Release Valves are used to release the air that are formed in pipelines. Steady air release can avoid pressure surge and protect pipe lines from damaging. The Air Release Valve can release air when pipes are filled with water, a...
Application: Water Industrial Usage, Industrial Usage
Pressure: Pn1.0 ~ 2.5MPa
Temperature of Media: -10~120℃
Structure: Air Release
FG Stainless steel single screw pump is made of stainless steel material and can be driven by non explosion proof motor or explosion proof motor or frequency variable motor etc.FG Stainless steel eccentric helical rotor single s...
Flow rate: 1-150m3/h
Head: 60-240m
pump material: stainless steel
screw pump: rotor pump
WG, WGF, WD, WDF sewage pump is a new series sewage pump developed by our company according to the standard of JB2975-81 centrifugal sewage pump. This series of pumps is advanced in design, compact in structure, high in efficie...
Flow rate: 3-200m3/h
Head: 10-50m
pump material: cast iron or stainless steel
centrifugal pump: transfer pump
SP submerged slurry pump is for vertical centrifugal slurry pump and submerged in liquid and used to transport abrasive, rough particles, high concentration slurry. The pump does not need any shaft seal and shaft seal water and can work ...
Flow rate: 7-1300m3/h
Head: 5-36m
pump material: high chrome alloy
centrifugal pump: slurry pump
UHB-ZK series anticorrosive and wear-resisting pump belongs to single-stage single-suction cantilever type centrifugal pump. The flow parts are made of steel lined with Ultra-high molecular weight polyethylene (UHMWPE) .UHMW...
Flow rate: 5-2600m3/h
Pressure: 5-80m
pump material: steel lined with UHMWPE
centrifugal pump: chemical pump
ZJQ Submersible slurry pump with agitatorZJQ Series submersible slurry pump is a kind of hydraulic mechanism which motor connects directly with pump. Pump body is the advanced structure of below suction type with stirrer and made f...
Flow rate: 20-750m3/h
Head: 10-60m
pump material: high chrome alloy
centrifugal pump: sewage pump
PNL vertical slurry pump is vertical single stage single suction mud pump. PNL vertical slurry pump is suitable to convey liquid containing solid particles. It is widely used in thermal power plant hydraulic ash removal, concen...
Flow rate: 2-1000m3/h
Head: 15-80m
pump material: alloy steel
centrifugal pump: transfer pump
PWL vertical sewage pumpPWL vertical sewage pump has the advantages of simple and reliable structure and convenient maintenance.2PWL, 4PWL, 6PWL and 8PWL are vertical single-stage single-suction cantilever centrifugal sewa...
Flow rate: 10-700m3/h
Head: 5-35M
pump material: cast iron or stainless steel
centrifugal pump: sewage pump
NB Series high efficiency and energy saving sand suction pump is single stage and single suction horizontal centrifugal pump, which is widely used to pump the mud with sand grains at the bottom of rivers and lakes, sludge and impurities ...
Flow rate: 2-400m3/h
Head: 3-30m
Pump material: cast iron or stainless steel
centrifugal pump: slurry pump
LWB vortex pump is a new type sewage pump with low wear, no winding and no clogging. The pump design is unique. The impeller is not located in the center of the pump chamber. The conveyed medium does not go through the impeller, direc...
Flow rate: 5-50m3/h
Head: 5-12m
pump material: cast iron or stainless steel
vortex pump: sewage pump
YLB Press filter slurry centrifugal pump is used to transfer various corrosive slurry or pulp with particles or suspensions at the temperature from 10 to 120 degree Celsius. YLB slurry or pulp centrifugal pump is the good equipment ...
Flow rate: 2-400m3/h
Head: 3-120m
pump material: cast iron lined with PTFE
centrifugal pump: chemical pump
ZJE-II Horizontal Slurry feeding Pump for press filterZJE-II slurry feeding pump is a kind of special impurity pump. Slurry is sucked from the back side of the pump. The pump is equipped with pack gland seal (no leakage) and ...
Flow rate: 2-400m3/h
Head: 3-90m
pump material: cast iron or stainless steel
centrifugal pump: chemical pump
HTB-ZX-U Series anti-corrosion engineering plastic self-priming pump is horizontal single-stage single-suction cantilever self-priming pump. The pump adopts vacuum pump principle to have the self priming performance. The flow parts...
Flow rate: 2-120m3/h
Head: 3-50m
pump material: steel lined with UHMWPE
centrifugal pump: chemical pump
Submersible sewage pump 220V,50HZ Single phase or three phase motorVortex impeller able to handle solids efficiently. Designed for transferring and discharge sewage.1. Power Cable: Standard cord is 10m2. Liquid Temperature: 104 ...
Flow rate: 9m3/h
Head: 7m
motor: 220V,50HZ,1.1kw
centrifugal pump: transfer pump
SJB Chemical pump is for the single stage single suction centrifugal pump and has the good features such as abrasion resistance and corrosion resistanceAll flow parts of SJB chemical pump are for non metallic materials (UHMWPE...
Flow rate: 2-400m3/h
Head: 3-80m
pump material: A3 Steel with plastic liner
impeller: open type
G Series single screw pumpG Series single screw pump can be used as a general pump. The rotary speed for G Series single screw pump can high or low. The output pressure for G Series single screw pump can be increased with the pump...
Flow rate: 0-200m3/h
Head: 0-240m
pump material: cast iron or stainless steel
Screw pump: slurry pump
Wear resisting ceramic centrifugal pump and ceramic slurry pump are single suction single stage centrifugal pump. The pump body and pump cover are made of low acid ceramics with excellent corrosion resistance and wear resistance. T...
Flow rate: 5-400m3/h
Head: 3-50m
pump material: metal lined with ceramic
centrifugal pump: chemical pump
RGB hose pump or peristaltic pump:RGB Industries hose pump is called as peristaltic pump. The peristaltic pump is suitable to handle various fluids with impurity, high viscosity, high density fluids and the fluids with equal liquid ...
Flow rate: 2-100m3/h
Head: 60m
slurry pump: pulp pump
sewage pump: chemical pump
AFB centrifugal pump is a kind of single stage single suction cantilever corrosion resistant centrifugal pump which is improved on the basis of F type corrosion resistant pump. The pump is made of 1Cr18Ni9Ti, 304, 316L etc ma...
Flow rate: 2-2000m3/h
Head: 3-60m
pump material: stainless steel ,alloy steel,duplex steel
centrifugal pump: chemical pump
ZJ Single stage centrifugal Slurry Pump ZJ(L) series are designed as single stage, single suction double casing centrifugal slurry pumps. The pumps are classified into vertical(ZJL) and horizontal(ZJ) construction. The ZJ(L...
Flow rate: 5-2000m3/h
Head: 4-130m
pump material: high chrome alloy
centrifugal pump: slurry pump
FY pneumatic slurry pump adopts the air pressure difference to make the piston run up and down and then drive the guiding plunger to open and close and finally lift the liquid. The flow rate for pneumatic slurry pump can be controlled an...
Flow rate: 10-100L/MIN
Head: 30M
pump material: stainless steel
Slurry pump: high viscosity pump