Body material: brassStructure: Direct actionType: Normally cosed Seal Material: NBR,EPDM,VITONPort size: 1/8''Port thread: G,NPT,PTOrifice: 2.2mmTemperature: 0°C to 80 °CMedium: water, gas, ste...
Material: Brass
Pressure: Low Pressure
Temperature of Media: High Temperature
Working Pressure: 0-8bar
Product Name: VG10-02833 3 way brass butterfly handle ball strainer valve Size: 1/2" 3/4" 1" Material: Brass Field of Application: Water Working Pressu...
Material: Brass
Pressure: Low Pressure
Temperature of Media: Normal Temperature
Port Size: 1/2'' 3/4'' 1''
Guanli knife gate valve for industrial service applications.The design of the body and seat assures non-clogging shutoff on suspended solids in industries Such as:*Pulp and Paper*Power plants*Chemical plants*Wastewater*Food and Be...
Material: CF8M/CF8
Knife: SS304/SS316
Standard: EN1092/ANSI/JIS 10K/AS4087
Size range: DN50-DN900
Voltage: 220V/380VFeature: High EfficiencyWarranty: 1 YearTheory: Centrifugal PumpStandard or Nonstandard: StandardPackaging Details: STRONG CARTON PACKING WITH EXPORT STANDARDPort: NI...
Structure: Multistage Pump
Usage: Water
Application: Submersible
Power: Electric
Pump InstalLation And AppLicationsIt can be used to transfer clean water or other liquid similar to water in physical and chemical properties. It is suitable for small living water supply, automatic water sprinkler system, small air...
Shaft: Stainless steel welded shafti45# steel
Insulation class: B or F
Protection class: IPX4
Max. Ambient temperature: +40t
Air Release Valves are used to release the air that are formed in pipelines. Steady air release can avoid pressure surge and protect pipe lines from damaging. The Air Release Valve can release air when pipes are filled with water, a...
Application: Water Industrial Usage, Industrial Usage
Pressure: Pn1.0 ~ 2.5MPa
Temperature of Media: -10~120℃
Structure: Air Release
CGF no leakage fluorine plastic lining high temperature magnetic pump adopts magnetic principles. When the motor drives the outer magnetic cylinder to rotor, the inner magnetic cylinder assembly is affected by magnetic force and rotates...
Flow rate: 1-400m3/h
Head: 3-80m
pump material: cast iron lined with PTFE
centrifugal pump: chemical pump
ZJE-II Horizontal Slurry feeding Pump for press filterZJE-II slurry feeding pump is a kind of special impurity pump. Slurry is sucked from the back side of the pump. The pump is equipped with pack gland seal (no leakage) and ...
Flow rate: 2-400m3/h
Head: 3-90m
pump material: cast iron or stainless steel
centrifugal pump: chemical pump
TBZB Stainless steel heat preservatin self priming pump is made of stainless steel material as the single stage single suction centrifugal pumpTBZB heat preservation self priming pump is suitable for the chemical fluids which is ea...
Flow rate: 2-400m3/h
Head: 3-80m
pump material: stainless steel
self priming pump: centrifugal pump
HTB-ZX-U Series anti-corrosion engineering plastic self-priming pump is horizontal single-stage single-suction cantilever self-priming pump. The pump adopts vacuum pump principle to have the self priming performance. The flow parts...
Flow rate: 2-120m3/h
Head: 3-50m
pump material: steel lined with UHMWPE
centrifugal pump: chemical pump
1. No suction device and no filling water or infusing water. The pump adopts diaphragm vacuum pump to suck the air inside the pipeline and the water into pipeline automatically is sucked to the impeller...
Flow rate: 2-450m3/h
Head: 3-150m
pump material: cast iron or stainless steel
centrifugal pump: self priming pump
SJB Chemical pump is for the single stage single suction centrifugal pump and has the good features such as abrasion resistance and corrosion resistanceAll flow parts of SJB chemical pump are for non metallic materials (UHMWPE...
Flow rate: 2-400m3/h
Head: 3-80m
pump material: A3 Steel with plastic liner
impeller: open type
QDN domestic submersible pump is developed and produced by our company. QDN Stainless steel domestic submersible pump is made of 304, 306 and 316L stainless steel with Wear and corrosion resistant mechanical seals. QDN stainless...
Flow rate: 0-6m3/h
Head: 1-80m
pump material: SS304, SS316,SS316L
submersible pump: stainless steel pump
QXP tangential flow pump is a kind of single-stage single-suction tangent pump with small flow rate and high head. It is especially designed for the fluids with solid medium and which are easy to wear.QXP tangential pump can be made ...
Flow rate: 0.1-15m3/h
Head: 20-120m
pump material: stainless steel,alloy steel
centrifugal pump: chemical pump
IR horizontal hot water centrifugal pump is used to transfer the hot water with temperaturee less than 120 degreeC.IS Series single stage single suction end suction horizontal centrifugal pump is the energy-saving pump to substitute B...
Flow rate: 2-300m3/h
Head: 3-125m
pump material: CAST IRON
horizontal pump: hot water pump
IRG Series single stage single suction centrifugal pump is for vertical structure and has the same performance parameters as IR heat water pump. The pump has the advantages such as high efficiency, low noise and reliable perfor...
Flow rate: 2-1500m3/h
Head: 3-125m
pump material: cast iron or stainless steel
centrifugal pump: inline pump
Wear resisting ceramic centrifugal pump and ceramic slurry pump are single suction single stage centrifugal pump. The pump body and pump cover are made of low acid ceramics with excellent corrosion resistance and wear resistance. T...
Flow rate: 5-400m3/h
Head: 3-50m
pump material: metal lined with ceramic
centrifugal pump: chemical pump
LWB,WLB Vertical explosion-proof sewage pump is suitable to pump the wastewater as the drainage water pump and irrigation pump. The pump consists of shaft, bearing bracket, impeller, pump seat, motor frame and motor etc. The impell...
Flow rate: 2-1500m3/h
Head: 3-45m
Pump material: cast iron or stainless steel
motor: common motor or explosion-proof motor
T/P Series super industrial self priming sewage pump is used to transfer the wastewater/trash with big solid particle or fiber etc impurity. The solid particles diameter can be up 76.2mm.The pump can be made of cast iron or stainless s...
Flow rate: 10-700m3/h
Head: 5-35m
pump material: cast iron or stainless steel
centrifugal pump: self priming pump
LC Vertical long shaft submerged pump is developed and improved on the base of common submerged pump. LC Vertical long shaft submerged pump is used to transfer the clear water, rainwater, iron oxide water, sewage, corrosive liquids su...
Flow rate: 50-8400m3/h
Head: 15-150m
pump material: cast iron or stainless steel
centrifugal pump: multistage pump
AFB centrifugal pump is a kind of single stage single suction cantilever corrosion resistant centrifugal pump which is improved on the basis of F type corrosion resistant pump. The pump is made of 1Cr18Ni9Ti, 304, 316L etc ma...
Flow rate: 2-2000m3/h
Head: 3-60m
pump material: stainless steel ,alloy steel,duplex steel
centrifugal pump: chemical pump
AFSM wear resisting and corrosion resistant alloy steel pump, high temperature dilute sulfuric acid corrosion wear resisting pump, metal smelting pulp pumpIntroduction:AFSM wear resisting corrosion resisting alloy pump,...
Flow rate: 3-200m3/h
Head: 5-45m
pump material: alloy steel
wear resisting pump: corrosion resisting pump
WLP/LWP vertical stainless steel sewage pump is mainly composed of shaft, bearing frame, pump cover, impeller, pump seat, motor bracket, motor and other components. The pump is a vertical single stage single suction volute pump...
Flow rate: 2-1500m3/h
Head: 3-45m
pump material: stainless steel
centrifugal pump: sewage pump
GWP Stainless steel vertical pipeline sewage pump is made of stainless steel material and used to transfer the dirty water containing solid particles or long fiber etc impurity or the clear water or corrosive liquids. GWP Stainless ...
Flow rate: 8-1500m3/h
Head: 5-60m
pump material: stainless steel
centrifugal pump: sewage pump
FPG Series RPP corrosion resistant pipeline centrifugal pump is made of reinforced polypropylene (RPP) by one injection molding. The pump is vertical structure with the same inlet and outlet diameter and is located on the same ce...
Flow rate: 3-22m3/h
Head: 10-28m
pump material: RPP (reinforced polypropylene
centrifugal pump: chemical pump
ZJ Single stage centrifugal Slurry Pump ZJ(L) series are designed as single stage, single suction double casing centrifugal slurry pumps. The pumps are classified into vertical(ZJL) and horizontal(ZJ) construction. The ZJ(L...
Flow rate: 5-2000m3/h
Head: 4-130m
pump material: high chrome alloy
centrifugal pump: slurry pump